Internet Download Manager has been registered with fake Serial Number [Solution]


Many people out there are using Internet Download Manager to download all stuff on their computer but as we all know Internet Download Manager is not a free tool. So, almost everyone uses its crack version toactivate it. In recent update their is an issue reported by many people i.e a popup appeared on screen saying “Internet Download Manager has been registered with fake serial number”. This is of course a big problem for those who using its crack version.
There are two methods to solve this problem. You can use anyone (personally I like second method which is more easy)

Method 1 – Editing Host File:

    1. Go to Computer -> C:/ Drive -> Windows -> System32 -> Drivers -> etc. Now you are on the following path
      C:\Windows\System32\Drivers\etc
    2. Here you can see some files. One of them is named as ‘hosts’
    3. Right click on hosts -> properties -> Security tab.
    4. Select Admin account and them click ‘Edit’
    5. Now give full control and read write rights by selecting check boxes.
    6. Click apply then Ok
    7. Now you have rights to edit hosts file. Go to Start -> Run
    8. Type notepad %windir%\system32\drivers\etc\hosts
    9. Click ok as shown in image below internet download manager has been registered with fake serial number solution  2 Internet Download Manager has been registered with fake Serial Number [Solution]
    10. A notepad file will open. Copy and paste below lines in the end of that file

      127.0.0.1 tonec.com
      127.0.0.1 www.tonec.com
      127.0.0.1 registeridm.com
      127.0.0.1 www.registeridm.com
      127.0.0.1 secure.registeridm.com
      127.0.0.1 internetdownloadmanager.com
      127.0.0.1 www.internetdownloadmanager.com
      127.0.0.1 secure.internetdownloadmanager.com
      127.0.0.1 mirror.internetdownloadmanager.com
      127.0.0.1 mirror2.internetdownloadmanager.com
    11. Check below imageinternet download manager has been registered with fake serial number solution  3 Internet Download Manager has been registered with fake Serial Number [Solution]
    12. After pasting these lines of code save the notepad file and exit from there.
    13. All Done in method -1.
So, now your Internet Download Manager is activated for lifetime.

Method -2:

  1. This one is a bit easy method, after cracking and activating IDM go to the installation folder i.e in my case it is
    C:\Program Files\Internet Download Manager
  2. Here you can find a file named “IDMGrHlp.exe“. Rename it to anything you want or just delete it.
  3. Check this image internet download manager has been registered with fake serial number solution  4 Internet Download Manager has been registered with fake Serial Number [Solution]
  4. The fake serial key issue is resolve but wait Now every time when you run IDM it will show you error that
    IDM cannot find 1 files that are necessary for browser and system integration. Please reinstall IDM
  5. To solve this issue place any file in that folder and rename it to “IDMGrHlp.exe”. what I did is, I made a copy of “idmBroker.exe” and renamed it to “IDMGrHlp.exe”
  6. All done.
Now you know both the methods to get rid of all annoying messages and popups. Activate your Internet Download Manager and share this useful post with your friends. Thanks!

How to Use Burn & Dodge Tool

how to lightened skin complexion of your customer's photo. Now, this video tutorial below will teach you on how to use the Burn and Dodge Tools in Adobe Photoshop CS2, to make the photo looks good. More video tutorials for those who want to start a Rush ID Photo Printing Business will be provided here for free. Please click " Follow This Blog" on the right side panel to keep you updated

FIX: RAN "Error occurs while patch file transmitting"



 
1.   Download Ran Online Manual Patch here  
      password: Gh0sTriDER
 
2.   Download and replace Ran Launcher here
     

 That's all Launch the Game!!

Microsoft Provides Bootable Repair Disk to Fix Windows 7 Restart Problems

Recently Microsoft released a security update KB2823324 for Windows 7 users to fix some issues found in Windows file system kernel-mode driver (ntfs.sys). Unfortunately this security update caused a big problem for many Windows 7 users. Lots of users who installed this update and restarted their computer system, couldn't boot again in Windows. Users started receiving random error messages at startup such as:
  • The file system structure on the disk is corrupt and unusable. Please run the Chkdsk utility.
  • The Session Manager Initialization system process terminated unexpectedly. The system has shutdown.
  • Windows failed to start. A Recent hardware or software change might be the cause.
  • The boot selection failed because a required device is inaccessible.
  • File system is corrupt,  Windows failed to restart, etc.
Also if the user was using Kaspersky antivirus in Windows 7, it stopped functioning with the error message "Your license is not valid".
Microsoft acknowledged the problem and immediately removed the download links of the update and also provided recovery steps to fix the restart problems in those Windows 7 computers. These recovery steps require you to access System Recovery Options using F8 keys or Windows 7 setup disc which is not an easy task for normal users.
To make the task easier, Microsoft is now providing a free recovery disk image to Windows 7 users who are facing this restart problem. This recovery disk is available in an ISO image format. You just need to download the ISO image file and then you can create a bootable DVD or USB drive using any freeware. After that you'll need to boot your computer system using this recovery disk and it should automatically fix the problem.
Please remember that:
  • This recovery disk will not run on old hardware (pre 2004) that does not support NX.
  • This will only run on Windows 7 32-bit installations.
  • It will not work if Bitlocker is enabled.
Interested people can download the recovery disk using following link:
The ISO image size is 220.5 MB and can be used in Windows 7 32-bit with or without Service Pack 1 (SP1).

How To Repair Windows 7 From USB Flash Drive (Repair Without Installation DVD Disc)

One of the best features of Windows 7 is that it lets you create a repair disc so that you can use it when you encounter problems with the installation. You can use this recovery disc to access system recovery options.
 repair windows 7 from usb flash drive
Unfortunately, Windows 7 doesn’t allow you create a bootable USB flash drive. So, in this guide, we will show you how to create a bootable Windows 7 recovery USB flash drive.

The procedure is simple and pretty much similar to our how to install Windows 7 from USB flash drive guide. And the best thing is that you don’t need Windows 7 installation DVD to create this recovery USB drive.

Method 1:
1. Type create system repair disc in Windows 7 Start menu search box and hit enter.
 repair windows 7 from usb flash drive wihout installation disc
2. In the resulting dialog-box, select your DVD drive. Insert a blank DVD into the DVD drive and then click Create disc button to start creating Windows 7 repair disc. Wait for a few minutes to complete the burning task.
 repair windows 7 from usb flash drive wihout installation disc 1
3. Once you have Windows 7 repair disc, you can now create a Windows 7 recovery USB drive. Plug your USB flash drive and make sure that you have no data on the USB drive as we are going to format it.
 
4. Open Command Prompt with administrator privileges. To do this, type CMD in Start menu search field and then hit Ctrl + Shift + Enter. Alternatively, go to All programs, Accessories, right-click on Command Prompt and then select Run as administrator.
 repair windows 7 from usb flash drive wihout installation disc 2
5. In the command prompt, you need to execute the following commands.
Type DISKPART and hit enter.
 Now, type LIST DISK and press enter to see list of disks attached to your computer. In the next step, you need to select your USB flash drive that you are using to create system recovery drive (in this example, we are selecting Disk 1).
From now on, type all the following commands one by one and then hit enter (again, please make sure that you are replacing the DISK 1 with your Disk number).
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
repair windows 7 from usb flash drive guide
6. Now, insert the previously created repair disc and copy all the contents (contains three items) to the USB flash drive. You have just created a bootable Windows 7 recovery USB drive. Good luck!

repair windows 7 using USB flash drive

Method 2: Users who don’t like to burn a DVD can refer this method.
1. Download Windows 7 Recovery Disc ISO file.
2. Follow the procedure given in step 4 and step 5 (under Method 1).
3. Extract the ISO file contents using WinRAR or 7-Zip to your USB flash drive to create your USB recovery drive.
4. Before you restart your PC, you might need to enable USB booting feature in the BIOS settings.
5. Good luck!


Forbidden You don't have permission to access /phpmyadmin/ on this server

It could be a number of things but it is probably that apache is Listening on the W8 IPV6 default localhost address which is ::1


1. edit httpd.conf, using the link on the wampserver icon wampserver -> apache -> https.conf
find the line > Listen 80
and change to > listen 0.0.0.0:80

This will force apache to listen on IPV4 and make the pre-configured phpMyAdmin security configuration compatable.

THATS IT!!


By default phpMyAdmin has the following access restriction:
Order Deny,Allow
Deny from all
Allow from 127.0.0.1

IP Address 127.0.0.1 is the IPv4 address for localhost

You may also need to make sure your HOSTS file has the line
#127.0.0.1 localhost
uncommented to
127.0.0.1 localhost
or add it if it does not exists.


The hosts file is protected by windows, in order to save it you must have Administrator privilages.
Vista/W7/W8 you may think you are an Administrator BUT YOU ARE NOT.

To successfully save the hosts file do this to launch your editor with Admin Privilages.

Locate your editors icon on the desktop or from the Start menus ( notepad will do if you have nothing else )
left click + shift over your chosen editor icon - will show a menu.
select "Run As Administrator" from the menu.
Navigate your editor to the c:\windows\system32\drivers\etc\hosts file.

When you have made changes you will now be allowed to save them.

[solve] Change MySQL root password in WAMP server














The MySQL console
Open MySQL console from WAMP menu. Wamp MySQL Console
Alternatively you can launch ‘MySQL’ from command prompt.
C:\wamp\bin\mysql\mysql5.1.36\bin>mysql
Setting a password for root user
The WAMP bundle does not have a password for the root user by default. You can login right away by hitting the <Enter> key (refer image below).
mysql console from cmd prompt
At the “mysql>” cmd prompt, enter the following line, and press ENTER.
SET PASSWORD FOR root@localhost=PASSWORD('Enter Your Password here');
Note: Replace your password in the place ‘Enter Your Password here’ and make sure you have typed inside the quotes.
A successful password change will look like this.
MySQL password change window
Now, you have changed the password for MySQL’s root user. But phpMyAdmin will attempt to connect to MySQL using NO password (as configured in config.inc.php), throwing an error as shown below.
Error 1045 - Access denied for user 'root'@'localhost' (using password NO)
To update the mysql password set in phpMyAdmin’s configuration:
  1. Browse to WampServer phpmyadmin folder, for ex: Installed drive:\Wamp\apps\phpmyadmin3.5.1
  2. Open the config.inc.php file using Notepad or Wordpad. The file should look like this:
    config.inc
  3. Replace the empty quotes with the password that you have set for the MySQL and change the ‘AllowNoPassword’ value to false. For ex.
    MySQL password variable
  4. Save the file and you are done. Now go back to browser and press ” Ctrl + F5 “.